Cold SAW model S225
225 mm ( 9" ) Saw Blade
| S225 Cutting Range | 90° | 45° | 60° |
|---|---|---|---|
| round tube ⦿ | 70 mm - 2.8'' | 65 mm - 2.6'' | 55 mm - 2.2'' |
| solid round ⬤ | 40 mm - 1.6'' | 40 mm - 1.6'' | 40 mm - 1.6'' |
| square tube ▣ | 60 mm - 2.4'' | 60 mm - 2.4'' | 50 mm - 2.0'' |
| section tube ▭ | 80 mm x 60 mm - 3.15" x 2'' | 70 mm x 50 mm - 2.8" x 2'' |
HABERLE Model S 225
HSS Saw Blade (9") 225x32mm/ Powerful saw for sites, installation and work bench. Cuts small tubes and profiles of steel, stainless steel and nonferrous metals.
Safety Saw blade Guard
Swing guided double guard of cast aluminum, covers the saw blade totally in rest position. Moving the saw head, the guard opens in the cutting area only, for best operator's safety. Quick release lift-up system to change the saw blade.
Drive Gears
Precision worm & wheel drive: Hardened and ground worm shaft. Strong main spindle runs in oil, free of maintenance. Special bronze wheel for long life. Available with standard or reduced speeds.
Available Motors & Electric
50 Hz Cycle: 1-phase 1-speed motor 230 V, 1.0 kW (1.3 HP), 3-phase 2-speed motor 400 V or 415 V, 0.8/1.2 kW (1.1/1.5 HP).
60 Hz Cycle: 1 -phase 1 -speed motor 110 V, 1.2 kW (1.5 HP), or 3-phase 2-speed motor 220 V or 460 V, 0.9/1.35 kW (1.2/1.6 HP).
Saw blade Speeds
50 Hz Cycle:
Slow speeds: 42 RPM or 42/84 RPM, allows also stainless steel.
60 Hz Cycle:
Slow speeds: 50 RPM or 50/100 RPM, allows also stainless steel.
Vise Systems
Standard with single mechanical vise. Strong buttress Ø 27 x 4 mm (1.2"). Optional: double-grip vise with replaceable jaw plates, allows burr-free straight cuts and profiled jaws for special applications. Maximum clamping range with jaw plates in place: 80 x 60 mm (3.1 x 2.4").
HSS Saw blades
225 x 2 x 32 mm (9") with 2 drive holes Ø 8 mm, cycle Ø 45 mm. A saw blades flange of Ø 70 mm allows the maximum cutting depth.
Machine Table, Pivot Bearing
Mitering table allows acute mitering to the left within 60°. Engraved 1° graduation, with quick stop bolt at 45°, strong clamp bolt M12 (1/2"). In any position, the work-piece is supported on both sides close to the saw blade. Large double yoke pivot system with 100 mm (3.9") bearing length and cast iron base care for high stability.
Innovative Saw blade Lubrication
Patented mechanical low-consumption lubrication system, specially designed to use the machine on sites and installation, cares for permanent oil supply to the saw blade without any air or electric power. A brush besides the saw blade applies pure cutting oil out of an oil cell. When starting to work, this cell has to be filled up with oil out of the 500 ccm tank by the hand operated oil pump placed on the tank. The oil cell and the capillary hose to the tank care for permanent oil lubrication for hours. Only very little oil is used up, the tank volume will last for more than 100 hours of operation. Machine, chips, material and workbench remain dry and clean. English instruction label on the tank.
HABERLE S 2000 Metal Cutting Oil
Biodegradable oil for metal cutting operations, free from mineral oils or any harmful substances, cares for a long tool life. Extremely high lubricating power leads to very poor warm up, water cooling is not necessary. S 2000 also can be used as screw-cutting oil on pipes and for other metal processing, for pure application, best for all metals.
Standard Equipment
Instruction manual in English with parts list, operating wrenches, single vise, mechanical oil lubrication system, 1 bottle with 1000 ccm cutting oil HABERLE S 2000.
Optional Equipment
Double-grip vise with jaw plates set, saw blade, cutting oil, fabricated steel stand, small length stop 1 meter (40"), graduated length stops.