AL380H Semi-Automatic

model AL380H

Semi-Automatic

AL380H Cutting Range 90° 45°
round tube ⦿ 5.5'' 4.7''
solid round ⬤ 3'' 3''
square tube ▣ 4.9'' 4.2''
section tube ▭ 7'' x 3.5'' 5'' x 3.5''

HABERLE Model AL 380H (Semi Automatic):

TCT (tungsten carbide tipped) 380 mm x 40mm saw blade (15")

  • High speed aluminum saw, for high production, cuts aluminum alloys and plastics (non-ferrous)

*Not suitable for cutting steel, stainless steel and hard materials (ferrous material)

  • Powered Saw head with Quick Forward Motion
  • Adjustable Power Stroke and Quick Return
  • Pneumatic Control System with 2-Vises
  • Two-Hand Safety Start and Emergency Stop


Electric System
Main switch according to EN 262, switches off the whole machine, Thermal overload motor protection. 24 Volt system. Permanent motor drive with manual stop function.

3-phase motor 3.0 (3.6) kW, with separate switch for safe set-up or maintenance works. Available: 4.0 (4.8) kW at extra charge. Safety control system

Air controlled cutting cycle for reliable operation and easy maintenance. Two-hands safety start and emergency stop push button according to the latest safety regulations. The emergency stop signal switches off the motor and also cares for safe clamping of the material while the saw head returns into rest position.

Saw Head Down feed
Reliable saw blade feeder system with quick motion, infinitely adjustable power feed and quick return into rest position. Necessary air supply: 6 bar (90 psi).

Clamping System
Two quickly adjustable sleeve-type air vises can be moved into any position on the flat table Separate air pressure regulator for each cylinder (Ø70 mm). Replaceable jaw plates allow also profiled jaws for special applications The rear jaw plates can be moved close to the saw blade for cutting thin material.

Carbide Tipped Saw Blade
Max
380 mm x 40 mm (15") TCT (tungsten carbide tipped)

Drive holes: 2x Ø12 mm on circle Ø64 mm.

Saw Blade Lubrication
Standard with fluid spray dispenser uni-MAX® Model 20 from UNIST INC. USA, With HABERLE saw blade nozzle built into the saw blade guard, adjustable to the size of the saw blade, for best lubrication at extremely low fluid consumption.

Chip Chute Channel
The turbo-wind effect of the saw blade blows most of the chips through the channel of the pivot block, 4" diameter exhaust connection.


Optional

Pusher system integrated to Automate the cutting process


Machine unpacked:
0.8 x 1.3 x 1.6 m (2.5' x 3.6' x 5'), 360 kg


Share by: