Cold SAW model h300
315 mm (12.5") Saw Blade
| H300 Cutting Range | 90° Straight Cut | 45° Miter Cut |
|---|---|---|
| round tube ⦿ | 95 mm - 3.8'' | 90 mm - 3.6'' |
| square tube ▣ | 95 mm - 3.75'' | 86 mm - 3.4'' |
| section tube ▭ | 160 mm x 60 mm - 6.2" x 2.5'' | 115 mm x 60 mm - 4.5'' x 2.5'' |
| solid round ⬤ | 60mm - 2.5'' | 60mm - 2.5'' |
| solid square ∎ | 60mm - 2.5'' | 60mm - 2.5'' |
HABERLE Model H 300: HSS Saw Blade (12.5") 315x40mm/ Heavy-duty saw for material stocks, workshop and full-time production. Cuts steel, stainless steel and nonferrous metals.
Drive Gear Unit
Robust double-supported worm shaft, heavy construction saw blade drive spindle with tough texture bronze wheel.
Saw blade Speeds 50 Hz:P
Slow speed: 22.5 / 45 RPM
Single-phase: 45 RPM
Saw blade Speeds 60 Hz:
Slow speed: 26 / 52 RPM
Single-phase: 52 RPM
Clamping Unit
The strong double-grip vise allows burr-Iess straight cuts by clamping also the cut-off piece. For mitering cuts, the right arm can be taken off if necessary. Optional: Vise with quick-action lever.
Mitering 0°- 45°
The saw head turns to the left for mitering cuts.
Engraved scale 0°- 45° by 1° steps. Adjustable table clamp lever.
Air Clamping Equipment (Version B)
Optional automatically clamping vise, controlled by an air valve behind the saw head. Complete with air regulator and lubricator unit.
Vise Jaw Plates
Replaceable against specially profiled jaws if required. The rear plates can be moved to close the cutting slot for mitering cuts whenever thin material is to be cut.
Coolant Equipment
Standard with diaphragm pump, fluid regulator and handy pull-out coolant tray for perfect circulation.
Safety Saw blade Guard
Swing guided double guard of cast aluminum, swings forward without jamming vise or material and closes in rest position for safe operation.
Saw blades H.S.S.
Steam-treated, two pin-holes Ø 11 mm on circle Ø 64 mm.
315x2.5x40 mm; 300x2.5x40 mm
Main Switch
Lock-up main switch with thermal motor protection.
Weights and Dimensions
Machine unpacked: 140 kg; 750x450x900 mm
Machine packed: 155 kg; 750x550x650 mm
Standard Equipment
Double-grip vise; coolant system; operating wrenches; operator's manual with parts list.
Optional Equipment
Vise with quick-action lever; air clamping equipment; saw blades; machine stand; coolant fluid; slow-speed motor; single-phase motor; length stop; material roller carriers.