Cold SAW model h250
250 mm ( 10" ) Saw Blade
| H250 Cutting Range | 90° | 45° |
|---|---|---|
| round tube ⦿ | 3.2" | 3.0" |
| round solid ⬤ | 1.6" | 1.6" |
| square tube ▣ | 2.75" | 2.4" |
| section tube ▭ | 4.3" x 2" | 2.75" x 2.0" |
HABERLE Model H 250: HSS Saw Blade (10") 250x40mm/Small production saw for tubes and profiles of mild steel, stainless steel and nonferrous metals.
DRIVE MOTOR (specify the required currency)
50 Hz:
Standard 3-phase 1400/2800 RPM, 1.3/1.75 HP
Optional 3-phase 700/1400 RPM, 0.6/1.0 HP
Optional 1-phase 1 -speed 1400 RPM, 1.2 HP
Optional 1-phase 1300/2600 RPM, 1.0/1.35 HP
60 Hz:
Standard 3-phase 1700/3400 RPM 1.5/2.1 HP
Optional 3-phase 800/1600 RPM 0.7/1.1 HP
Optional 1-phase 1-speed 1700 RPM, 1.5 HP
Optional 1-phase 1-speed 1100 RPM, 1.0 HP
DRIVE GEAR UNIT
Oversized precision worm & wheel drive, elastic safety coupling, main spindle of 62 mm (2.45") dia. running in an oil bath, for full time operation.
SAW BLADE SPEEDS
50 Hz:
Slow-speed 3-phase 25/50 RPM
1 -phase 50 RPM or 46/92 RPM
60 Hz:
Slow-speed 3-phase 30/60 RPM
1 -phase 60 RPM or 39 RPM
CLAMPING UNIT
Strong double-grip vise for burr-less straight cuts by clamping also the cut-off piece. For mitering cuts, the right arm can be taken off if necessary. Replaceable jaw plates.
Standard Vise (Version A) with hinged lever.
Optional Air Vise (Version B) for saw head controlled clamping.
Automatic stroke 8 mm (3/8"). Air regulator with filter-lubricator, air pilot valve. Necessary air supply: 6 bar (90 PSI).
MITERING SAW HEAD
The saw head turns to the left according to the engraved scale 0° - 45°. Adjustable clamp lever, adjustment screws for the positions 0° and 45°.
COOLANT SYSTEM
Reliable diaphragm pump, fluid regulator and handy pull-out coolant tank for perfect operation and easy cleaning.
SAFETY SAW BLADE GUARD
Swing guided double guard of cast aluminum, swings forward without jamming vise or work piece and closes in rest position for best operator's safety. Quick opening without tools to change the saw blade, the guard system remains on the machine.
SAW BLADE H.S.S.
Steam-treated, two pin-holes Ø 8 mm on cycle Ø 55 mm. Size: 250 x 2.0 x 40 mm
WEIGHTS & DIMENSIONS
Machine unpacked: 70 kg, 700 x 420 x 800 mm (27.5" x 16.5" x 32")
Machine packed: 85 kg, 620 x 480 x 580 mm (24.5" x 19" x 23")