Cold SAW model h450
450 mm ( 18" ) Saw Blade
| H450 Cutting Range | 90° | 45° |
|---|---|---|
| round tube ⦿ | 160 mm - 6.3'' | 135 mm - 5.3'' |
| solid round ⬤ | 60 mm - 2.4'' | 60 mm - 2.4'' |
| square tube ▣ | 140 mm - 5.5'' | 120 mm - 4.7'' |
| section tube ▭ | 200 mm x 80 mm - 7.9'' x 3.2'' | 140 mm x 90 mm - 5.5'' x 3.5'' |
HABERLE Model H 450:
HSS Saw Blade (18") 450 mm x 40 mm - For steel construction and production , cuts large steel and stainless steel tubes, channels, sections and construction profiles.
Hand-operated High Quality Cold Saw
Heavy duty worm & wheel drive with hardened and ground worm shaft and special bronze worm wheel, completely free from clearance, running in an oil bath. Oversized main spindle for full-time operation, axial adjustable. Saw blade speeds: 60 Cycle = 28/56 RPM.
Safety Guard System
The two-piece hinged safety guard made of cast aluminum cares for best operator's safety. In rest position, it covers the saw blade completely and remains a short over the cutting area when swiveling the saw head. Quick lift-up without tools for easy saw blade replacement.
Saw Head Pivot System
Rigid, double yoke pivot with hardened and ground shaft, adjustable on both sides.
Mitering Saw head
Head easily miters within 45° to any position, with positive locking at 45°- 0°- 45°. Mitering table is clamped from top. Work piece remains stationary while head rotates.
Clamping System
Standard with two manual quick action vises (Version A), each movable and with exchangeable vise jaw plate. Air operated automatic vise system (Version B) at extra price, with pilot valve behind the saw head for immediate clamping when the saw head is lifted from rest position, and with air filter-regulator-lubricator. Operating pressure: 6 bar (90 PSI). Separate air regulator for each vise cylinder.
Water Coolant System
Coolant tank 40 Liters (10 Gal.); separate, removable chip container; powerful diaphragm pump driven by eccentric bearing in the saw head; coolant supply to both sides of the saw blade.
Electric Equipment
3-phase 2-speed motor, 28/56 RPM. Main switch with thermal overload protection.
Saw blades H.S.S.
450x3.5x40 mm (18")
450x3.0x40 mm (18")
400x3.0x40 mm (16")
350x3.0x40 mm (14")
350x2.5x40 mm (14")
Drive holes: 2 off 12 mm diameter on cycle 64 mm diameter.
Not recommendable for segmental saw blades, they over stress the machine.
Standard Equipment
1 set of operating tools, 1 instruction booklet with parts list.
Extra Equipment
Length stop 1 meter (40") non-graduated, various length stops with metric rule;
top clamp manual or air operated; air vise system; down feed restriction cylinder;
semi-automatic version; saw blades, coolant fluid, roller carriers.
Dimensions and Weights
Machine unpacked: 720x1000x1800 mm; 350 kg
Machine packed: 800x1200x1600 mm; 390 kg