Metal Cutting Cold Saws

HABERLE Model H 6: HSS Saw Blade (10") 250x40mm/ For cutting all sizes of sheet-metal flanges in the heating and ventilation industry.

View Brochure: HABERLE_H_6.pdf

Other Metal Cutting Saws:
S 225, H 250H 300, H 350, H350/H, H 450, H 90

Safety Sawblade Guard

The link operated twin guard covers the whole sawblade when the machine is not actually cutting and opens when the machine head is moved downwards.

  

Motor

When ordering please specify voltage and cycle of your current.

50 Hz:

Standard
Optional
Optional
1 -phase

3-phase
3-phase
1 -phase
2-speed motor

400/2800 rpm,
700/1400 rpm,
1400 rpm,
upon request

1 0.75/1 HP
0.6/0.9 HP
0.75 HP
 

60 Hz:

Standard
Optional
Optional

3-phase
3-phase
1 -phase

1700/3400 rpm,
850/1700 rpm,
1700 rpm,

0.75/1 HP
0.6/0.9 HP
1.5 HP

 

Sawblade Speeds

50 Hz:

25
50
100

rpm with motor speed
rpm with motor speed
rpm with motor speed

700
1400
2800

rpm
rpm
rpm

60 Hz:

30
60
120

rpm with motor speed
rpm with motor speed
rpm with motor speed

850
1700
3400

rpm
rpm
rpm

 

Cutting Range

with sawblade 250mm

Teeth

Round Tube
Square tube
Section
Solid

3" dia.
2.25" x 2.25"
4" x 3.75"
2" dia. mild steel
160
160/200
160/200
80
 
 Main Switch

The front mounted main switch is supplied with Emergency Off push button and thermal motor overload protection.

Drive Unit

The robust worm and wheel drive runs in an oil bath. The hardened and ground worm is mounted in bearings at both ends. The main spindle is of heavy construction, and the wheel is made of special bronze material, guaranteeing long life.

Clamping Unit

The manual or pneumatic double-grip vice holds the material on both sides of the sawblade, to ensure a burr-free cut.

Coolant System

A removable reservoir for coolant and a separate swarfdrawer is provided in the machine base. The diaphragm pump ensures good cooling.

Sawblades H.S.S.

250 x 2.0 x 40 mm, with 110, 160 or 200 teeth;
225 x 1.6 x 40 mm, with 220 teeth for flanges.
Two pin holes 8 mm dia. on cycle 55 mm dia.

Dimensions and Weights

Machine unpacked:  470 x 750 x 950 mm, 96 kg
Machine in carton:   480 x 980 x 570 mm, 116 kg
Fabricated stand:     420 x 585 x 580 mm, 22 kg

Standard Equipment

Profiled jaws equipment for the flanges, operating wrenches, operator's manual.

Optional Equipment

Fabricated machine stand; sawblades; concentrated coolant fluid; length stops